The Biotage Selekt Enkel is a workhorse automated flash system with one column channel for flash applications employing columns from 5 g to 100 g.
The Biotage Selekt Enkel has the following features either as standard or as optional extras that can be added at any time after installation.
As an optional upgrade, the Biotage Selekt Enkel can have the Spektra software enabled, giving full lamda-all spectral data collection for the ultimate in detection. The upgrade also features baseline correction which negates the effects of solvent compositional changes by real-data baseline subtraction, and wavelength focusing to maximize the response from samples with low absorption. Spektra pushes the envelope on flash detection and fraction collection.
As an optional extra, the Biotage Selekt Enkel can be fitted with an extended collection bed for those occasions when a large number of fractions need collecting.
Flash chromatography is a tool to get you where you want to be: at the end of the synthesis of your new molecule. That is our goal at Biotage, to make Your Chemistry Better.
That is why we have designed a system which will save you time, solvent and will be fun to use. Not bad for being just a tool...
Selekt is a lean and compact automated flash system with two column channels, so you can run two separation in one instrument. You can also easily switch between normal and reverse phase, with the system automatically flushing the solvent lines for you.
The columns can be mounted on the side of the system or on the front, so you can fit up to three Biotage® Selekt systems in a standard fume hood to make the most of your space and maximize your productivity.
No waste of space, no waste of time and no loss of sample, as we pause fraction collection when moving from one tube to next. Did we mention that the beautiful user interface is also very easy to use? And that it comes with a 5-year warranty?
Selekt has the smallest footprint among all the commercially available systems, but still has the higher pressure and flow rate, so equilibration and separation can be run in a flash (isn't that the meaning?). When used with the Sfär columns, they are designed to tolerate the high pressure and their quality means less re-runs, higher efficiency. In a flash.
We have created a system with high pressure and flow rate and combined with a new family of columns that tolerate high pressure and flow rate. The result is a system that suggests you the most efficient columns for your separation and allows you to equilibrate your columns as fast as possible to quickly bring you through your separation having used less silica, less solvent, less time. Isn't that worth a try?
Biotage's approach to applications using Selekt Enkel is built around speed, productivity and reduced environmental impact. This is achieved by the combination of Selekt with Sfär high-performance flash columns.
The Biotage Selekt Enkel is capable of performing purifications running on 5 g to 100 g columns.
Chemistry, by its very nature, involves the use of chemicals that can be harmful, toxic and potentially damaging to the environment. Drug discovery currently has a large and expensive environmental footprint so finding a solution is good for both the chemist and the environment.
By utlizing smaller columns for reduced solvent consumption, the Selekt Enkel helps to make your workflow greener as well as faster - a win for you and for the environment.
For laboratory scale applications, our Sfär columns offer extremely high loadings allowing you to choose the smallest column size per g of sample giving fast separations and saving solvent - a green and efficient way to purify your samples.
Biotage Selekt Enkel is designed to operate with columns from 5 g to 100 g.
Biotage® Liquid Level Sensor is an innovative technology*(**), providing true solvent management by streamlining solvent use and waste management before, during, and after your run. Compatible with our Biotage® Selekt family of purification systems, our Liquid Level Sensor is designed to enhance efficiency in your laboratory. This gives you the confidence that your separation will not run out of solvent or overflow the waste container.
*Biotage® Liquid Level Sensor is pending a patent.
**Biotage® Liquid Level Sensor is pending approval in certain countries.
Biotage® Liquid Level Sensor constantly keeps track of your solvent and waste volumes, enabling full control over your liquid handling. You will know from the start the required solvent and expected waste volumes and the sensor monitors liquid levels throughout your run.
Avoid a failed run due to inadequate liquid handling, as the sensor pauses the process and notifies you to fill and empty solvent and waste reservoirs. Our tube holder keeps the solvent filter on the bottom of the reservoir and the waste line in position, so there's no risk of aspirating air or spilling liquid.
For a true plug and play experience, use the sensor with our pre-calibrated reservoirs. You can also use standard reservoirs, or other sizes with the help of our Universal Cap Adapter. For your convenience, calibration files can be transferred between systems, so you only need to calibrate your reservoir once.
Biotage Selekt features password protected logins and the ability to lock the screen, so that only authorised individuals can access a run in progress (except to stop the pump in the case of a leak). This feature also works when employing the remote access accessory.
When accessing a Biotage Selekt system remotely, end-to-end encryption is employed to ensure your data and information remains totally secure.
The Biotage Selekt system comes with the capability to mirror the instrument's screen on a wide range of external hardware such as laptops, phones and tablets. This allows users to control the system on a range of external devices over a network.
The Selekt system also features a full monitor API, or application programming interface. This allows external systems to monitor the Selekt system for updates on the status of the instrument, allowing the Selekt to be fully integrated into laboratory management software.
Biotage offers a variety of service agreements to choose from.
The Sfar columns have significantly higher loading than SNAP columns, for reduced solvent consumption, reduced run time and greater productivity.
Part No. | Description |
---|---|
SEL-ESV | Biotage® Selekt Enkel single channel, single collection bed, UV detector |
417501SP | Biotage® Selekt Enkel network upgrade kit |
417502SP | Biotage® Selekt Enkel extended bed upgrade kit |
417504SP | Biotage® Selekt Enkel RFID upgrade kit |
SEL-SPK | Biotage® Spektra Software Package |
SEL-RC | Biotage® Selekt Remote Control |
SEL-mAPI | Biotage® Selekt Monitor API |
Biotage® Selekt
Biotage is the Global Go-To Separations Company, supporting customers from drug discovery and development through to diagnostics and analytical testing with intelligent and sustainable workflow solutions. Our expertise and top-tier separation solutions play a key role in streamlining our customers’ workflows and improving their outcomes. Headquartered in Sweden, Biotage operates globally with 700 employees, serving over 80 countries. Our company is listed on NASDAQ Stockholm (BIOT).
Copyright © 2024 Biotage